If you're wanting to find out how to setup your POS terminal that consists of:
☞ 1x StoreHub Prime (D2)
☞ 1x Bluetooth Thermal Receipt Printer
☞ 1x Cash Drawer
You may find your answers at below.
When the terminal is set up, it should look similar to the following image.
Set Up StoreHub Prime (D2) POS Device with Bluetooth Printer
Find the USB B cable.
In your printer box, you will find a USB B cable that should look like the image below.
Identify Your StoreHub Prime & Printer Ports.
Locate the ports on your StoreHub Prime device and Printer.
Using the USB B cable, connect each end to your StoreHub Prime and the Printer.
Suggested ports for each device:
☞ Printer - Port #1
☞ StoreHub Prime - Port #2
Add the Printer to Your System.
Open the StoreHub app. Key in your 4 digit pin number. Tap the top left ellipsis icon (...).
Go to Settings > Printer > tap Search Printer and add your new printer device.
Using a LAN Printer? We've got you covered, check this article out!