All Collections
New iOS POS
New iOS: General
How to Enable & Use Table Layout on POS
How to Enable & Use Table Layout on POS

Adding table and floor layouts for a more organised service.

Updated over a week ago

What You Will Learn in This Guide

  • How to create floor layouts, table sizes, names, and pax-per-table.

  • How to customise existing table layouts.



Important Notes

  • All settings for Table Layout need to be done on the POS Register.

  • The Edit Table Layout settings in the BackOffice doesn't not synced with the Table Layout created on the POS Register.


Enable Table Layout in BackOffice

1. In the BackOffice, under Settings, select POS Registers option.

2. Click on the POS Register that you wish to enable Table Layout.

3. Under Enable Table Layout section, select Yes.

4. Click Save.

5. The next step is to enable Table Layout on your POS Register. Refer to steps below.


Enable Table Layout on POS

1. On your POS Register, sync & ensure all information has been successfully synced.

2. Go to POS Settings, select Layouts & toggle Enable Table Layout feature.

3. Select Edit Table Layout.

4. You will be directed to the Table Layout page, click on the + button on the right bottom side.

5. Add floor and key in the floor name.

6. Add tables and input the table number & number of pax for each table.

7. Click Save Layout.

8. Return to your Register page, then you will see the tables created.


Using the Table Layout

1. On your POS Register, go to your main layout page.

2. Choose the table of the desired floor; if you have more than one floor.

3. Select the number of Pax dining at the table.

4. Add items, then save the orders.

5. You can now see all the orders saved under a specific table.


Would you like to learn more on how to change order to another table? Refer to this article for more details.

Did this answer your question?