Articles in this section

See more

Troubleshooting: How to Read Printer LED Lights (TSP 650 & TSP 100)

Avatar
Ashli
  • Updated
Follow

Introduction

The LED lights on your printer can prove useful when it comes to troubleshooting. Whether they're static, blinking slowly or blinking rapidly, we'll explore the different LED indicators to better understand why your printer is causing an issue.

The Ready LED and the Error LED will let you know the status of the device, such as if its status is 'ready' or if an error occurs.

The Ready LED is the blue LED to the left, and the Error LED is the red LED to the right.

TSP100 (LAN) Errors

1. Error: The printer cover is open.
Set the paper, close the printer cover, and the LED will move to the ready status.

Ready LED is not lit and the Error LED is lit

2. Error: The printer is out of paper.
Set the paper, close the printer cover, and the LED will move to the ready status.

Ready LED is not lit, Error LED is blinking (1/2 second intervals)


For less common errors that aren't listed in this article, do refer to the full list here:
http://www.star-m.jp/products/s_print/tsp100iiilan/manual/en/troubleshooting/ledIndicators.htm

 

TSP 650ii (LAN) Errors

Hardware_Manual_TSP650II_Series.jpg

For less common errors that aren't listed in this article, do refer to the full list here:
http://www.starmicronics.com/support/Mannualfolder/tsp650ii_hm_en.pdf

 

 

Related articles

Comments

0 comments

Please sign in to leave a comment.