Introduction
Need help changing paper rolls? Read on to learn how!
Need help changing paper rolls? Read on to learn how!
For the full, official guide from Star Micronics (with images), please click the link below:
http://www.star-m.jp/products/s_print/tsp100iiilan/manual/en/basicOperations/installingPaper.htm
Changing your thermal paper rolls
Step 1.
Turn the power ON
Set the paper with the power ON to automatically feed or cue the paper.
Step 2.
Open the printer cover
Push the opening lever upward to open the printer cover.
Step 3.
Insert the paper
Place the paper roll in, with the loose end of the paper coming out from the bottom.
http://www.star-m.jp/products/s_print/tsp100iiilan/manual/en/basicOperations/installingPaper.htm
Changing your thermal paper rolls
Step 1.
Turn the power ON
Set the paper with the power ON to automatically feed or cue the paper.
Step 2.
Open the printer cover
Push the opening lever upward to open the printer cover.
Step 3.
Insert the paper
Place the paper roll in, with the loose end of the paper coming out from the bottom.

Step 4.
Close the printer cover
Pull the end of the paper straight out, sandwich the paper and close the printer cover.
The process of changing the paper roll is complete when the paper cuts itself automatically.
Step 5.
Push in both sides and close the rear cover.
Size of paper roll: 80mm x 80mm x 12mm OR 80mm x 60mm x 12mm.
Note: Please remove the piece of paper that was cut automatically by the printer.
Comments
0 comments
Please sign in to leave a comment.