iPadOS: Connect Your Hardware

Introduction

Great! You have set up the basic features on your StoreHub app and BackOffice. The next thing you will need to do is to set up your hardware, which is really simple! This article will show you how. 

Note: This guide shows you how to connect to the standard hardware. If the hardware you purchased is different from the ones shown in this guide, please refer to the relevant articles on our Hardware page.

Connect Your Hardware

Here are the steps:

Step 1:
The first step is to set up your StoreHub router. Go to this page for more instructions:

Setting up the StoreHub router to the LAN printer (with internet) or
Setting up the StoreHub router to the LAN printer (without internet)

​

Step 2:
Once you have set up your router, you can now set up your printer. You can go to this document to set up your LAN or Bluetooth printer: Setting Up Your LAN / Bluetooth Printer. 

​​
Step 3:
You're done! You've downloaded the StoreHub app, configured the basic settings on your BackOffice and have set up your StoreHub router and receipt printer.

This means you're ready to start using StoreHub as your POS system!

Need further assistance?
Contact our Customer Care Team

📧 care@storehub.com